Description
		 Valve function		  2/2 closed monostable
					 Actuation type		  Electrical
					 Build.width [mm]		  9
					 Normal nominal flow [l/min]		  100
					 Operating pressure [bar]		  0.5 to 6
					 Construction set up		  Poppet valve without reset spring
					 Reset mode		  Pneumatic spring
					 Protection category		  IP40
					 Pitch dimension [mm]		  9,5
					 Information about operation		  Do not operate without flowFor block assembly with flow max. ambient temperature 45 ??C.
					 Sealing principle		  Hard
					 installation position		  arbitrary
					 Hand assist actuation		  none
					 Control type		  Direct
					 Flow direction		  Not reversible
					 b-value		  0.38
					 C-value [l/sbar]		  0,40
					 Max. switching frequency [Hz]		  1.000
					 Shifting time on at 4 bar and 24 V in new condition [ms]		  0,8
					 Shifting time off at 4 bar and 24 V in new condition [ms]		  0,4
					 Shifting time on at 4 bar and 48 V in new condition [ms]		  0,6
					 Shifting time off at 4 bar and 48 V in new condition [ms]		  0,4
					 Shifting time on at 4 bar and 12 V in new condition [ms]		  1,1
					 Shifting time off at 4 bar and 12 V in new condition [ms]		  0,4
					 Shifting time on at 0.5 bar and 24 V in new condition [ms]		  0,7
					 Shifting time off at 0.5 bar and 24 V in new condition [ms]		  0,5
					 Shifting time on at 6 bar and 24 V in new condition [ms]		  0,9
					 Shifting time off at 6 bar and 24 V in new condition [ms]		  0,4
					 Tolerance shifting time off		  +15 %/-25 %
					 Tolerance shifting time on		  ??15 %
					 Operating voltage range DC [V]		  12 to 53
					 Power-on time		  100 %
					 Information about operating voltage		  Only with MHJ9-KMH-… line.
					 Coil resistance [Ohm]		  2,5
					 Operating medium		  Compressed air to ISO 8573-1:2010 [7:4:4]
					 Information about operating and control medium		  Oiled operation not possible
					 Limits ambient and media temperature		  Depending on the switching frequency
					 Corrosion resistant class KBK		  2 – moderate corrosion stress
					 Bearing temperature [??C]		  -20 to 50
					 Permitted surface temperature magnet [??C]		  120
					 Medium temperature [??C]		  -5 to 60
					 ambient temperature [??C]		  -5 to 60
					 Max. tightening torque Valve fastening [Nm]		  0,28
					 Product weight [g]		  25
					 Electrical connection		  2 pinPlug KMH
					 Fastening type		  on connection plate
					 Pneumatic connection 1		  Connection plate
					 Pneumatic connection 2		  Connection plate
					 Material information		  RoHs compliant
					 Seals material		  HNBR
					 Housing material		  PA reinforced
					 Screws material		  Steel		 					 	 	 	 	 












Reviews
There are no reviews yet.