Description
Design For T-slot
Based on standard EN 60947-5-6
Permission RCM mark
CE certificate (see declaration of conformity) to EU EMC directiveto EU EX protection directive (ATEX)
KC-mark KC-EMV
Special features Oil resistant
Material information halogen freeCopper and PTFE-freeRoHs compliant
Measured parameter Position
Measurement principle Magnetoresistive
ambient temperature [??C] -40 to 85
Repeatability [mm] 0,2
Control output NAMUR
Switching element function NAMUR
Switch on time [ms] < 1 ms
Switch off time [ms] < 1 ms
Max. switching frequency [Hz] 330
Residual current [mA] 0.4 to 1
Rated operating voltage DC [V] 8,2
Operating voltage range DC [V] 7.5 to 18
Reverse polarity protection for all electrical connections
Electrical connection 1, connection type cable
Electrical connection 1, connection technology Open end
Electrical connection 1, number of pins / wires 2
Connection outlet direction along
Test conditions line Bending radius strength to Festo standardTest conditions on request
Cable length [MTR] 10,0
Line properties Robot friendlyCable track capable
Cable shield colour blue
Cable sleeve material TPE-U(PUR)
Insulation sleeve material PP
Fastening type Insertable from above into the slotPermanently screwed
Max. tightening torque [Nm] 0,6
installation position arbitrary
Product weight [g] 104,0
Housing colour black
Housing material High-alloyed stainless steelsPA reinforced
Switching status indicator LED yellow
Ambient temperature for moving cable placements [??C] -20 to 85
Protection category IP65IP68
Wire ends Wire end sleeve
ATEX gas category II 1G
Ex ignition protection type gas Ex ia IIC T4...T6 Ga
ATEX dust category II 1D
Ex ignition protection type dust Ex ia IIIC T135??C Da
Ex protection approval outside of the EU EPL Da (BR)EPL Da (IEC-EX)EPL Ga (BR)EPL Ga (IEC-EX)
Ex ambient temperature T4: -20??C <= Ta <= +85??CT6: -20??C <= Ta <= +45??CT4, For permanent cable placement: -40??C <= Ta <= +85??CT6, For permanent cable placement: -40??C <= Ta <= +45??C
Max. input voltage [V] 28
Max. input current [A] 0,25
Max. input power T4: 350 mWT6: 72 mW
Effective inductivity 30 ??H
Effective capacity 79 nF
Certified awarding point DNV 17.0027 XIECEx PTZ 18.0008XPTZ 16 ATEX 0010 X
residual ripple 10 %
Reviews
There are no reviews yet.