MGPL25-60Z Thin Cylinder with Guide Rods | Compact High-Precision Linear Drive Expert

➤ Product Highlights Overview
✔ Ultra-thin design saves 50% installation space
✔ Precision guide rods ensure ±0.01mm high repeat accuracy
✔ High-speed movement with maximum speed up to 800mm/s
✔ Dual-guide structure increases torque resistance by 3 times

📐 Ultra-Compact Structural Design

• Overall height is only 32mm (1/2 of traditional cylinders)
• Width optimized to 62mm, suitable for dense installation
• Three mounting methods available: front flange / rear flange / side mounting

⚙️ Core Performance Parameters

Parameter Item	Specification
Cylinder Bore	Φ25mm
Stroke	60mm
Working Pressure	0.1~0.7MPa
Maximum Speed	800mm/s
Repeat Accuracy	±0.01mm
Guiding Method	Dual chrome-plated hard shaft guiding
Load Capacity	Radial 30N·m / Axial 500N
Ambient Temperature	-10℃~80℃

🔧 Unique Technical Advantages

1. Precision Guiding System

• 2 pieces of Φ8mm chrome-plated hard guide rods
• Linear bearing preload adjustment structure
• Anti-rotation accuracy ≤0.1°

2. High-Speed Response Characteristics

• Low-friction seals (friction coefficient ＜0.01)
• Optimized airflow channel design
• Start-stop time ＜0.05s

3. Enhanced Sealing

• Triple sealing structure (main seal + dust seal + guide seal)
• High-temperature resistant fluororubber material (optional)
• Service life ＞5 million times

🏭 Typical Application Scenarios
◼ Electronic component mounting equipment (SMT)
◼ Precision dispensing robots
◼ Optical lens focusing mechanism
◼ Semiconductor wafer handling
◼ Precision drive for medical equipment

🛠️ Installation and Maintenance Points

• The flatness of the mounting datum plane must be ≤0.02mm
• It is recommended to use a 0.3μm precision filter
• Exhaust throttling is recommended for speed control
• Supplement special grease every 500,000 operations
• It is forbidden to directly knock the guide rod with metal tools

⚠️ Key Notes
❗ Radial load must not exceed 30N·m
❗ Derating is required when working pressure is lower than 0.15MPa
❗ High-temperature resistant seals are recommended for high-temperature environments (＞60℃)
❗ Air cut-off protection device must be configured for vertical installation

📌 Product Value Summary
✓ Space Saving – 50% thinner than standard cylinders
✓ Precise Positioning – ±0.01mm repeat accuracy
✓ High-Speed Movement – Industry-leading 800mm/s
✓ Long Service Life – Ultra-long service life of 5 million times

MGPL40-25Z-M9PLS

MGPL32TF-200-XC35

MGPL63-175-Z73L

MGPL40-50-Z73Z

MGPL25-40-Y69B

MGPL25-40-X986

MGPL32-100Z

MGPL50-150-Y7NWZ

MGPL20-200-Y7NWV

MGPL63-100-P5DWSC

MGPL50-25-XC4W

MGPL40-50AZ

MGPL32-100Z-XC4

MGPL32-125-Z73L

MGPL25-45

MGPL20-50Z-M9NL

MGPL20-90

MGPL20-20-Y59BS

MGPL12-75

MGPL20-125Z

MGPL50-T5294-100

MGPL40-125-Y59B

MGPL63-125A

MGPL25-100-Y59A

MGPL25-75-Y7BWL

MGPL16-50-Y69A

MGPL63-350

MGPL25-30-Z73Z

MGPL32-150-Y7BWV

MGPL12-40Z-XB22

MGPL16-20-Y7BWZ

MGPL100-50A

MGPL12-100-Z73L

MGPL80-100-Z73L

MGPL50-400-P4DWSE

MGPL20-15-Y59A