​CDJ2RA16-125Z-B: Compact Power, Precision Guidance! Guided Rod Cylinder Empowers High-Rigidity Applications​

In automation applications requiring high-precision linear motion while withstanding certain side loads, the piston rods of standard cylinders are prone to seal wear and positioning deviations due to lateral forces. The CDJ2RA16-125Z-B is a compact guided rod cylinder that integrates a cylinder with high-precision linear guides into a single unit. With its high rigidity, resistance to eccentric loads, and excellent repeatability, it serves as the ideal drive solution for space-constrained applications demanding high motion accuracy.​​Core Product Advantages​​

• ​​High Rigidity & Eccentric Load Resistance​​Built-in high-precision linear guides can withstand substantial radial forces, torque, and moment loads, effectively protecting the piston rod. This eliminates wobble during movement, ensuring high repeat positioning accuracy (up to ±0.01mm).
• ​​Compact Integrated Design​​The highly integrated design of the cylinder and guide structure is compact, with the overall length significantly shorter than a “cylinder + external guide” combination. This saves installation space and simplifies equipment structure.
• ​​High Load Capacity​​The guide slide table provides a broad mounting surface for directly attaching fixtures or workpieces, offering a load capacity far exceeding that of standard cylinders with the same bore size.
• ​​Smooth, Fluid Motion​​The precision fit between the guide and slide block results in a low friction coefficient, enabling smooth and stable movement without creeping, even at low speeds.
• ​​Convenient Sensor Mounting​​The cylinder body features grooves for magnetic sensors (Z indicates a built-in magnet), allowing for easy installation of magnetic sensors to detect piston position. The slide table typically includes standard mounting holes for easy attachment of sensors or fixtures.

​​Typical Application Scenarios​​

• ​​Precision Handling:​​ Precise grasping, positioning, and placement of electronic components.
• ​​Precision Pressing:​​ Accurate pressing of small bearings, pins, etc.
• ​​Inspection & Sorting:​​ Enabling linear scanning and high-precision sorting with mounted sensors.
• ​​High-Rigidity Pushing:​​ Precise pushing operations in scenarios involving lateral resistance.

​​Technical Parameters (Typical Values)​​

• ​​Bore Size:​​ 16mm
• ​​Stroke:​​ 125mm
• ​​Repeat Positioning Accuracy:​​ ±0.01mm (Typical)
• ​​Operating Pressure Range:​​ 0.1 to 0.7 MPa
• ​​Operating Temperature Range:​​ -10°C to +80°C

​​Summary​​The CDJ2RA16-125Z-B guided rod cylinder is the “Rigid Drive Expert” for space-sensitive, high-precision applications. Its integrated guide and cylinder design achieves high rigidity and high-precision linear motion within a limited space, effectively overcoming the shortcomings of standard cylinders regarding eccentric load resistance and precise positioning.​​Choosing the CDJ2RA16-125Z-B means selecting the perfect combination of high rigidity, high precision, and compact space utilization!​