CMMP-AS-C5-3A-M0

Description

Fastening type on connection platePermanently screwed
Product weight [g] 2.200
Display Seven segment display
Permission RCM markc UL us – Listed (OL)
CE certificate (see declaration of conformity) acc. to EU-EMV Directiveacc. to EU Machine Directiveacc. to EU Low voltage Directiveacc. to EU-RoHS Directive
Bearing temperature [??C] -25 to 70
ambient temperature [??C] 0 to 40
Relative humidity 0 – 90 %
Protection category IP10IP20
Degree of contamination 2
Material information LABS containing materials includedRoHs compliant
Phase nominal operating voltage 1-phase
Nominal operating voltage AC [V] 230
Permitted voltage oscillations ?I 10 %
Network frequency [Hz] 50 to 60
Nominal current [A] 4 to 6
Network filter integrated
Max. intermediate circuit voltage DC [V] 320
Braking resistance [Ohm] 60
Impulse power braking resistance [kVA] 2,8
Nominal voltage logic supply DC [V] 24
Permitted range logic voltage ?I 20 %
Power input logic supply without parking brake [A] 0,65
Output voltage range AC 3x 0 – 270 V
Nominal output current [A] 5,0
Nominal current per phase, effective [A] 5,0
Peak current per phase, effective [A] 10
Max. peak current duration [s] 5
Nominal performance controller [VA] 1.000
Peak performance [VA] 2.000
Output frequency [Hz] 0 to 1000
Parameterising interface USBEthernetParameterising and commissioning
Fieldbus coupling CANopenModbus/TCP
Communication profile DS301/DSP402
Process coupling I/O couplingfor 256 mobile sets
Max. fieldbus transfer rate [Mbit/s] 1
Bus connector Sub-D9 pinPlug
Encoder output interface, properties Resolution 16384 ppr
Encoder output interface, function Actual value feedback via encoder signals for speed control modeTarget value for downstream switched slave actuator
Encoder input interface, properties EnDatHIPERFACERS422SINCOS3 phase encoder signals
Encoder input interface, function In synchronous mode as a speed preset of the slave actuatorEncoder signal target speed value
Quantity digital logic inputs 10
Properties logic inputs Freely configurableGalvanically separated
Work area logic input [V] 8 to 30
Quantity digital logic outputs 24 V DC 5
Properties digital logic outputs Galvanically separatedPartially freely configurable
Max. current digital logic outputs [mA] 100
Quantity analogue target value inputs 2
Properties target value inputs Differential inputsConfigurable for speedConfigurable for current
Work area target value input ?I 10 V
Impedance target value input [kOhm] 20
Quantity analogue monitor outputs 2
Work area monitor outputs ?I 10 V
Resolution monitor outputs [Bit] 9
Properties monitor outputs Short circuit proof
Certified awarding point 01/205/5162.02/19T??V Rheinland
Active PFC yes
Safety function Safe switched off torque (STO)Safe stop 1 (SS1)
Safety Integrity Level (SIL) Safe switched off torque (STO) / SIL 3 / SILCL 3
Performance Level (PL) Safe switched off torque (STO) / category 4 performance level e
Diagnose degree of coverage [%] 97
SFF Safe Failure Fraction [%] 99,17
Hardware error tolerance 1
Proof test interval [A] 20