Description
		 Position drive dimensions		  0720
					 Flange drilling screen		  F12
					 Swivel angle [deg]		  92
					 Shaft connection Depth [mm]		  38,5
					 Standard connection to fitting		  ISO 5211
					 Dampening		  No dampening
					 installation position		  arbitrary
					 Principle of operation		  single action
					 Construction set up		  Joch kinematics
					 Position detection		  without
					 Closing direction		  Right closing
					 Valve connection corresponds to standard		  VDI/VDE 3845 (NAMUR)
					 Safety Integrity Level (SIL)		  Product can be used in SRP/CS up to SIL 2 Low DemandProduct can be used in SRP/CS up to SIL 2 High Demand
					 Operating pressure [bar]		  5.6 to 8.4
					 Nominal operating pressure [bar]		  5,6
					 CE certificate (see declaration of conformity)		  to EU EX protection directive (ATEX)
					 ATEX gas category		  II 2G
					 ATEX dust category		  II 2D
					 Ex ignition protection type gas		  Ex h IIC T6…T3 Gb X
					 Ex ignition protection type dust		  Ex h IIIC T85??C…T200??C Db X
					 Ex ambient temperature		  -50??C <= Ta <= +60??C
					 Operating medium		  Compressed air to ISO 8573-1:2010 [7:4:4]
					 Information about operating and control medium		  Oiled operation possible (required in further operations)
					 Corrosion resistant class KBK		  2 - moderate corrosion stress
					 ambient temperature [??C]		  -20 to 80
					 Rotary torque for nominal operating pressure and 0?? pivot angle [Nm]		  720,0
					 Rotary torque for nominal operating pressure and 50?? pivot angle [Nm]		  360,0
					 Rotary torque for nominal operating pressure and 90?? pivot angle [Nm]		  480,0
					 Air consumption a 6 bar per cycle 0??-90??-0?? [LTR]		  29,40
					 Product weight [g]		  38.800
					 Shaft connection		  T36
					 Pneumatic connection		  G1/4
					 Material information		  RoHs compliant
					 Cover material		  Aluminium wrought alloy
					 Seals material		  FKMNBRPUR
					 Housing material		  Aluminium wrought alloy
					 Screws material		  High-alloyed steel
					 Shaft material		  High-alloyed steel
					 Material number shaft		  1.4305
					 Information about the adjustment range of the end positions		  Selectively one end position is adjustable
					 Connection pressure for spring strength [bar]		  5,6
					 Spring force torque at a swivel angle 0?? [Nm]		  480,0
					 Spring force torque at a swivel angle 50?? [Nm]		  360,0
					 Spring force torque at 90?? [Nm]		  720,0
					 Spring strength		  4		 					 	 	 	 	 
    












Reviews
There are no reviews yet.