Description
Design For T-slot
Based on standard EN 60947-5-2
Permission RCM markc UL us – Listed (OL)
CE certificate (see declaration of conformity) to EU EMC directive
KC-mark KC-EMV
Special features Oil resistantWelding field immuneresistant to welding spatterUV-resistant
Material information Copper and PTFE-freeRoHs compliant
Measured parameter Position
Measurement principle Magnetoresistive
ambient temperature [??C] -25 to 85
Max. movement speed [m/s] 1
Repeatability [mm] 0,2
Control output NPN
Switching behaviour during welding Output signal freezes
Switching element function NO contact
Switch on time [ms] <= 15 ms
Switch off time [ms] <= 25 ms
Max. switching frequency [Hz] 25
Max. output current [mA] 100
Max. output current in fastening sets [mA] 100
Max. switching capacity DC [W] 2,8
Max. switching capacity DC in fastening sets [W] 2,8
Voltage drop [V] < 1,5 V
Minimum load current [mA] 0
Residual current [mA] < 0,14 mA
Short circuit resistance yes
Overload resistant Available
Rated operating voltage DC [V] 24,0
Operating voltage range DC [V] 10 to 30
Reverse polarity protection for all electrical connections
Electrical connection 1, connection type cable
Electrical connection 1, connection technology Open end
Electrical connection 1, number of pins / wires 3
Connection outlet direction along
Test conditions line Bending radius strength to Festo standardTest conditions on request
Cable length [MTR] 5,0
Line properties resistant to welding spatter
Cable shield colour Grey
Cable sleeve material PVCIrradiated crosslinking
Insulation sleeve material PVC
Fastening type Insertable from above into the slotPermanently screwed
Max. tightening torque [Nm] 0,6
installation position arbitrary
Product weight [g] 119,4
Housing colour black
Housing material High-alloyed stainless steelsPA reinforcedEpoxy resin
Switching status indicator LED yellow
Functional reserve display LED orange
Ambient temperature for moving cable placements [??C] -5 to 80
Protection category IP65IP68
Noise immunity to magnetic fields Insensitive to AC magnetic fields (50...60 Hz) < 200 mTInsensitive to MFDC magnetic fields (1000 Hz) < 200 mTType limited insensitive to permanent magnetic fields < Bon
Wire ends Wire end sleeve
Reviews
There are no reviews yet.