Description
Valve function 2/2 closed monostable
Betriebsdruck Mpa [MPa] 0 bis 0,05
Operating pressure [bar] 0 to 0.5
Operating pressure [psi] [psi] 0 bis 7,25
Innenvolumen 113 ??l Ventil mit fluidischen Anschl??ssen
Nominal width [mm] 0,8
Dispensing needle nominal width [mm] 1,00
L?nge Dosiernadel [mm] 30
Pitch dimension [mm] 9
Sealing principle Soft
installation position arbitrary
Reset mode Mechanical spring
Control type Direct
Durchfluss Wasser bei max. Betriebsdruck 2000 ??l/s
Min. Dosiervolumen [??l] 5
Hinweis zum Dosiervolumen Abh?ngig von Konfiguration, Umfeld und Applikation
Typische Dosierpr?zision <1% CV f??r Volumina >5 ??l<2,5% CV f??r Volumina zwischen 1-5 ??l
Hinweis zur Dosierpr?zision Abh?ngig von Konfiguration, Umfeld und Applikation
Max. switching frequency [Hz] 4
Hinweis zur Schaltfrequenz abh?ngig von Umgebungstemperatur und Einbauzustand
Shifting time on [ms] 7
Hinweis zur Schaltzeit ein Abh?ngig von Konfiguration, Umfeld und Applikation
Shifting time off [ms] 2
Hinweis zur Schaltzeit aus Abh?ngig von Konfiguration, Umfeld und Applikation
Power-on time 100 %
Electrical power consumption [W] 1,8
Nominal operating voltage DC [V] 24
Permitted voltage oscillations ?I 10 %
medium Fl??ssige Medien
Hinweis zum Medium Pay attention to the resistance of the materials in contact with media
User information Siehe Applikation note (verf??gbar im support portal festo.com)
Oscillation strength Transport use test with severity level 2 to FN 942017-4 and EN 60068-2-6
Shock resistance Shock test with degree of severity 2 to FN 942017-5 and EN 60068-2-27
Corrosion resistant class KBK 0 - No corrosion stressing
Bearing temperature [??C] -20 to 70
Medium temperature [??C] 5 to 50
Protection category IP30
Information about protection category In mounted condition
ambient temperature [??C] 5 to 40
Product weight [g] 220
Electrical connection Sub-D9 pinPlug
Fastening type Optionally:with throughway for bolt M3with female threads and centring sleeve
Fluid connection 8x UNF1/4-28
Information on fluid connection Fitting for hoses with 3 mm outside diameter included
Dispensing needle material High-alloyed stainless steels
Dispensing needle material number 1.4301
Material information LABS containing materials includedRoHs compliant
From medium contacting materials ETFEFPMPCPEEKPPShochlegierter Stahl rostfrei
Actuation type Electrical
Nominal usage height above normal null <= 2000 m NHN
Relative humidity 0 - 95 %Not condensing
Degree of contamination 2
Information about power consumption Data per valve
Reviews
There are no reviews yet.