Festo DFPD-E vs DFPD Quarter-Turn Actuators: Torque, Angle, Air Consumption and When to Choose the E Version
2026-11-17If you are automating a ball valve, butterfly valve or damper, Festo’s catalogue now shows two closely related rack-and-pinion quarter-turn actuators: DFPD and DFPD-E. Both connect to the valve to ISO 5211 and take a pilot valve or position feedback device to VDI/VDE 3845 (NAMUR). The difference is the range they cover. This article compares them using only Festo’s official DFPD-E documentation (document 293578) and the DFPD product short information (142707 en 2026/11). For a general walk-through of the standard series, see our earlier DFPD quarter-turn actuator overview.
Quick answers
- DFPD-E is the compact unit for standard applications. The product page and dedicated catalogue state a lighter, more compact design, up to 20% lower air consumption, a maximum operating pressure of 8 bar, and a 90° swivel angle.
- DFPD-E sizes are 12, 18, 33, 55, 85, 125 and 185. In double-acting duty, torque at the 5.5 bar nominal pressure is the same at 0° and at 90°: 11.5, 18.5, 33, 55.1, 85.4, 125.1 and 187.5 Nm. Single-acting versions start at size 18.
- Standard DFPD covers a much wider band. The overview leaflet lists 10–4500 Nm (rack and pinion) and 3500–9500 Nm (scotch yoke), plus 9000–32000 Nm for the heavy-duty DFPD-HD. The standard angle is 90°; sizes 40, 120, 240 and 480 can also be specified as 120°, 135° or 180°.
- Use standard DFPD or DFPD-HD when you need a wider temperature range, a corrosion-resistant version, an angle other than 90°, or more torque. The overview lists optional high-temperature (0 to +150 °C) and low-temperature (−50 to +60 °C) variants on stated sizes. The DFPD-E datasheet gives an ambient range of −20 to +80 °C, and its type code only includes 90°.
- The operating medium for DFPD-E is compressed air to ISO 8573-1:2010 [7:4:4]. For what those digits mean, see ISO 8573-1 compressed air quality classes explained.
DFPD vs DFPD-E at a glance
DFPD and DFPD-HD figures below come from product short information 142707 en 2026/11. DFPD-E details follow document 293578. The overview summarises DFPD-E torque as 12–185 Nm; the table uses the datasheet values at the 5.5 bar nominal pressure for double-acting units.
| Item | DFPD-E | DFPD (and DFPD-HD) |
|---|---|---|
| Role | Compact unit for standard applications | Wider torque range and more options |
| Design | Rack and pinion | Rack and pinion; scotch yoke on larger sizes and HD |
| Mode of operation | Double-acting; single-acting from size 18 | Double-acting or single-acting |
| Sizes | 12, 18, 33, 55, 85, 125, 185 | 10, 20, 40, 60, 80, 120, 160, 240, 300, 480, 700, 900, 1200, 2300, 3500, 4500, 6500, 9500; HD: 9000, 18000, 32000 |
| Torque at 5.5 bar | 11.5–187.5 Nm, double-acting | 10–4500 Nm (rack and pinion); 3500–9500 Nm (scotch yoke); HD 9000–32000 Nm |
| Swivel angle | 90° only in the type code | 90° standard; 120°, 135°, 180° optional on sizes 40, 120, 240 and 480 |
| End-position adjustment | −5 to +5° at 0° and at the nominal angle | −5 to +5° at 0°; +85 to +95° at 90° |
| Operating pressure | 2–8 bar (nominal 5.5 bar, double-acting) | ≤ 8 bar |
| Ambient temperature | −20 to +80 °C in the DFPD-E datasheet | Standard −20 to +80 °C; optional 0 to +150 °C or −50 to +60 °C on sizes 40, 80, 120, 160, 240, 300, 480 |
| Interfaces | ISO 5211; VDI/VDE 3845 (NAMUR) | The same interface standards |
On air consumption, the wording is not identical in the two official documents. The DFPD-E product page and dedicated catalogue say “up to 20% lower air consumption”. The DFPD overview leaflet from the same period says “up to 30%”. This article follows the product-specific catalogue (20%). Check the current official PDF before you specify a figure in a datasheet.
How to read a DFPD-E part number
Take DFPD-E-55-RP-90-RD-F0507 as an example. The official type code in document 293578 breaks down as follows (E is defined there as “Economical”):
- DFPD: series; E: product version (Economical)
- 55: size. The available sizes are 12, 18, 33, 55, 85, 125 and 185. A leading N (DFPD-E-N-…) selects imperial pneumatic ports (NPT); the default is metric (G thread)
- RP: rack-and-pinion design
- 90: 90° swivel angle
- R: closing/swivel direction to the right (L = left); D: double-acting (S = single-acting)
- F0507: ISO 5211 flange hole pattern, here F05 and F07
Single-acting units also need a spring code. In DFPD-E-18-RP-90-RS30-F0305, S30 means springs rated for a 3 bar supply pressure. The catalogue lists spring steps of 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5 and 6 bar. The normal position can be closing, or U for open. Always confirm later fields such as flange pattern against the current catalogue.
The datasheet also notes that the actuator’s operating torque must not exceed the maximum torque allowed by ISO 5211 for the chosen flange and coupling size.
DFPD-E double-acting: torque, air consumption and weight
The figures below are taken from the dedicated catalogue. Torque is at 5.5 bar nominal pressure, and is the same at 0° and at 90° for double-acting units. Air consumption is for one cycle (0° → nominal angle → 0°) at 0.6 MPa (6 bar). Ports are G1/8 or 1/8 NPT on sizes 12–85, and G1/4 or 1/4 NPT on sizes 125–185.
| Size | Double-acting torque (Nm) | Air consumption per cycle (l) | Weight | Example type (metric, 90°, right, double-acting) |
|---|---|---|---|---|
| 12 | 11.5 | 0.72 | 785 g | DFPD-E-12-RP-90-RD-F04 (8248379) |
| 18 | 18.5 | 1.18 | 1,015 g | DFPD-E-18-RP-90-RD-F04 (8248778) |
| 33 | 33 | 1.95 | 1,511 g | DFPD-E-33-RP-90-RD-F05 (8243769) |
| 55 | 55.1 | 3.32 | 2,295 g | DFPD-E-55-RP-90-RD-F0507 (8251109) |
| 85 | 85.4 | 5.35 | 2,903 g | DFPD-E-85-RP-90-RD-F0507 (8243811) |
| 125 | 125.1 | 7.4 | 4,360 g | DFPD-E-125-RP-90-RD-F0507 (8233574) |
| 185 | 187.5 | 11.3 | 6,487 g | DFPD-E-185-RP-90-RD-F0710 (8243813) |
Single-acting torque depends on the spring set; the catalogue gives a range per size. For size 18 at nominal pressure, that range is 6.7–13.4 Nm at 0° and 3.1–6.2 Nm at 90°. Cycle air consumption at 6 bar is 0.55, 1.02, 1.68 and 2.57 l for sizes 18–85, and 3.7 and 5.5 l for sizes 125 and 185. Size 12 appears only in the double-acting ordering data.
When to choose DFPD-E, and when to stay with DFPD
- DFPD-E is the more likely fit when: you are switching a valve or damper through 90°, the required torque falls in the roughly 12–185 Nm band, the ambient temperature stays within −20 to +80 °C, you want a more compact unit with lower air use per cycle, and the air supply can meet [7:4:4].
- Move to standard DFPD or DFPD-HD when: you need more torque; a 120°, 135° or 180° angle; a high-temperature, low-temperature or corrosion-resistant version; or you want to follow the overview leaflet’s notes on SIL and on building a complete process-valve assembly.
That overview also shows DFPD as part of a complete automated process valve, together with a CMSX positioner, SRBC sensor box, VSNC NAMUR valve and VZBE ball valves. Whether a given accessory fits a particular DFPD-E size has to be checked against the current official documentation and the interface standards; this article does not infer compatibility.
Checklist before you specify or order
- The valve’s required operating torque, including any safety factor, and the maximum torque allowed by ISO 5211 for the flange and coupling
- Double-acting or single-acting; for spring-return, the supply pressure, spring step, and whether the valve must fail open or fail closed
- Whether the travel is exactly 90°, and how much end-position adjustment you need
- Port thread (G or NPT) and flange pattern (F03, F04, F05, F07, F10, and so on)
- Ambient temperature and any corrosive atmosphere; if the temperature is outside −20 to +80 °C, do not select DFPD-E from this article alone
- Whether the air supply meets ISO 8573-1:2010 [7:4:4]; the dew point must be at least 10 °C below the ambient and medium temperatures. Lubricated operation is possible, but once you start lubricating you must continue to do so
- Whether you need a NAMUR pilot valve, a position sensor or a positioner, and whether the interface is VDI/VDE 3845
Need a part-number check?
Email the valve type or torque, swivel angle, double- or single-acting duty, port thread, flange pattern and ambient temperature to doskee@dustry.ltd and we will help you check the type code against the official catalogue. Related reading: Festo DFPD quarter-turn actuator overview and ISO 8573-1 compressed air quality classes. You can also browse the Festo product category.
FAQ
Do DFPD-E size numbers match DFPD size numbers?
No. The size systems are different: DFPD-E uses 12, 18, 33 and so on, while standard DFPD uses 10, 20, 40 and so on. When you compare or replace a unit, check torque, flange, shaft connection, angle and spring configuration point by point, and stay within the ISO 5211 torque limit.
Is air consumption up to 20% lower, or up to 30%?
Both wordings appear in official Festo documents. The DFPD-E product page and catalogue 293578 say “up to 20%”; the DFPD short information 142707 en 2026/11 says “up to 30%”. This article uses the 20% figure from the product-specific catalogue. Always take the current official PDF as the reference.
Is a single-acting DFPD-E available, including size 12?
Single-acting versions are available from size 18 upward. The dedicated catalogue has no size 12 in the single-acting technical data or ordering table. The type code must include the spring step (for example RS30 for a 3 bar supply-pressure spring set).
Can DFPD-E rotate 180°?
In the official type code, the only swivel angle is 90°. Angles of 120°, 135° and 180° are listed for standard DFPD sizes 40, 120, 240 and 480.
Sources: Festo, Quarter turn actuator DFPD-E (293578_documentation.pdf); Festo product page Semi-rotary drive DFPD-E; Festo, Quarter turn actuator DFPD, product short information 142707 en 2026/11 (2780_documentation.pdf). If the documentation is revised, the current official Festo catalogue takes precedence.